The bottle rack washer is designed specifically for washing the vials in the B-11, Beth11 or EFR-11 bottle rack.

The basin of the bottle rack washer is made of urethane with a half inch square overlap region to hold the washer in the Counter-top cut-out hole. Inside are two PVC water lines with 11 outlets on each line spaced 2 inches on center. The water flow on each line is controlled by solenoid valves which are activated by pressing down the switch for that line as the rack is placed over the risers and spray heads. One line is normally connected to the regular water supply for thorough prewashing of the bottles. The second line is connected to pressurized distilled or deionized water for the final rinse.

Dimensions: height - 10, width 9 ½, length 31 ¾ inches, shipping weight approximately 40 Lbs.